Home » Posts filed under pabx panasonic progamming
Showing posts with label pabx panasonic progamming. Show all posts
Showing posts with label pabx panasonic progamming. Show all posts

PABX PANASONIC TDA 100 DBX PROGAMMING CODES

Posted by tony Tuesday, 9 September 2014 0 comments
PROGRAM TDA 100

Prog-*#-password-...(prog.address)
000=Date & Time
002=Speed Dial
003=Ext Numbering
004=Ext Name
005=PIN Ext
006=Operator
007=DSS Console
100=Flexible Numbering
101=Time Service Mode
102=Start Time Service
120=Account Code
123=Account Code COS
301=Tabel Deny Code
304=Emergency Number
400=CO Connecting
402=Trunk Group
410=Dial Mode
450=Ring
472=CO Duration Limit
500=Trunk Group Number
501=COS Level
502=activate time restrictions
505=EBO
506=EBO Deny
508=Account Code Mode
511=activate manager tel
514=activate manual service

516=activate Program Mode
600=XDP
601=activate Jack DSS
602=COS
603=Extension Group
620=Ring Group
622=Floating Number Inc Group
640=User Group Paging
650=Pick Up Group
710=BGM 2
711=MOH
712=Musik On Transfer
730=OGM Floating Number
800s/d805=SMDR
801=External Modem Control
810=Remote Program
811=Modem Floating Number

OPERATING TDA
Call Pick Up
Group : *40-group
Ext : *41-ext
Deny : *720-0/1 (0=allow,1=deny)
Paging All : *3301
Group : *33-group
Ext : No.Ext-*
Transfer : Transfer-*33-
Paging Group Answer : *43
Deny : *721-0/1 (0=allow,1=deny)
Ext Lock : *77-1
Ext unlock: *77-0-xxxx
(xxxx=ext PIN)
Manual Day : *7800
Manual Night : *7801
Ext Clear : *790
FWD All : *710-0/2/3/4/5-Ext-#
0=cancel,
2=All Call,
3=if Busy,
4=No Answer,
5=B/NA
External : *711-0/2/3/4/5-Ext-#
0=cancel,
2=All Call,
3=if Busy,
4=No Answer,
5=B/NA
Internal : *712-0/2/3/4/5-Ext-#
0=cancel,
2=All Call,
3=if Busy,
4=No Answer,
5=B/NA
Set Alarm : *760-jam-0=am/1=pm-
0=once/1=everyday
Cancel Alarm : *7600
Set Paralel Ring : *39-0/1
0=no ring,1=Ring
Turn On BGM : *751-no BGM
Cancel BGM : *7510
DISA
Rec : *361-Float Nb -Record-Store
PlayBack : *362-Float Nb
Erase : *360-Float Nb
SSD Using :
**/Auto Dial-SSD Code(3digit)
SPD Store :
*30-Code PSD(2digit)-Phone-#
SPD Using :
**/Auto Dial-SPD Code(2digit)
Account Code :
*49-xxxx-#-num.destination
Walking COS:
*727-no.Ext-no.Ext PIN
Conference
Key:
CONF-dial nbr-speak-CONF-speak

PABX PANASONIC HB 308/616 PROGAMMING CODES

Posted by tony 0 comments
  • HB-308/616
PROGRAM HB-308/616
Sys Pgm Entry : from jack 1,change
switch to Pgm mode.
Sys Clear : 99-next-all clear-press
memory-end
Ext Clear : 98-next-all clear-press
memory-end
System Programming Address
00=Date/Time set
01=SSD Entry
02=DSS console
03=CO conection
04=Dial Mode
05=Day/Night Switch mode
06=Set Day/Night
07=Day outgoing line
08=Night outgoing line
09=Day ring
10=Night ring
11=Ext COS
12=Tabel Deny TRS
13=Tabel Exept TRS
15=Prefer CO
16=Call Waiting
17=Delay ring Ext
18=Delay ring count
19=Int alert
21=Call Pick up Group
22=Acc Code Entry Mode
23=Duration Count Start
24=SMDR parameter
26=SMDR in/out Select
27=Hold time reminder
28=Hold recal time set
29=Ext paging tone
34=DSS button mode
36=Transfer recal time
38=Barge in ext
44=Ext Music
98=St Clear
99=Sys Clear

ARS (automatic route selection) SETTING IN PABX PANASONIC HT SERIES

Posted by tony 1 comment
After 2 hours of experimenting finally managed to setting Ars in pabx panasonic tem 824!!
case like this:
suppose a customer had 2 PABX incoming line, line No. 1 from the telecoms and the No. 2 terminal gsm and he asked if he dial 9 + no telp addition to local, pabx automatically selects line from terminal gsm and vice versa.
directly to the way the program:
1.Go program
2.go to ARS selection / 350, enable CO1 (telecoms) & amp; co2 (gsm)
3. routing to the selection code 2/352, the contents of No. 1 with code 08 and save (store)
4.go to ARS co line group, the contents of the trunk grp 1 R1 and R2 with a trunk grp 2
5.finish and test out the program.

PABX PANASONIC A SERIES 308 PROGAMMING CODES

Posted by tony 2 comments
  • A Series 308
PROGRAM A Series 308
Sys Prog : (jack 1) on/off-*0001#
Program System & CO Line
setting for receiving a call : *100-0s/d2-#
0=disable,
1=ext,
2=all ext

System Time : *801-hh-mm-#

Flash Time : *122-0/1-#
0=disable,1=enable

Mode Transfer : *121-0/1-#
0=manual,1=auto

System dial CO1 : *211-0/1-#
0=tone,1=pulse
CO2 : *221
CO3 : *231

Mode ring CO1 : *214-0/1-#
0=tone,1=music
CO2 : *224
CO3 : *234

 Line conect CO1 : *212-0/1-#
0=CO,1=PBX
CO2 : *222
CO3 : *232

Dial 0
*213-0/1-#
0=disable,1=enable line
*223
*233

Fax conec CO1 : *215-0/1-#
0=disable,1=conect
CO2 : *225
CO3 : *235

 SSD : *112-0/1-#
0=disable,1=enable

Ring Music : *102-0/1-#
0=disable,1=T change
*214-0/1-#

0=Tremolo,1=7 music

Jack & No. Ext >>>
300=10 310=11 320=12
330=13 340=14 350=15
360=16 370=17

Program Extension
Ext 10
Ring Day : *300-0s/d3-#
0=disable
1=Ring CO1
2=Ring CO2
3=Ring CO3

Ring Night : *307-0/1-#
0=disable,1=night ring

COS : *309-0s/d3-#
0=intercom,1=local,3=free
 : ext 10-*309,ext 11-*319,ext 12-*329,13-*339,14-34,*915-*359,16-*369

 line : *503-0s/d3-#
0=free

Barge in : *302-0/1-#
0=disable,1=enable

HB-1232 progamming

Posted by tony Wednesday, 18 January 2012 0 comments

 
Enter Sys Prog: Slide the switch on the side
central to the PGM position, Program of
Jack 01
 
System Feature
00 = Date / Time set
01 = SSD Entry
02 = Ext Numbering
03 = Operators Ext
04 = DSS Paired
05 = Auto CO transf using DSS
06 = Day / Night Mode
07 = Day / Night Time
08 = Call Hunt Set
09 = Hunt Type
12 = TRS for SSD
13 = Table COS 2 (3 digits)
14 = Table COS 3 (3 digits)
15 = Table COS 4 (3 digits)
16 = Table COS 5 (3 digits)


DISA ctrl code 31 = * = enabled
prlg time = 5 minutes
ans delay time = 10 seconds
tone detect = enabled
security type = trunk
RMT scrty code = 70 000
scrty user code = 60 000

17 = Hold time reminder
18 = Hold time recal
19 = Transfer time recal
20 = Call Forwarding start time
21 = Pick up the dial delay time
22 = CO to CO duration limit
29 = Ext paging tone
23 = RS 232 parameters
24 = SMDR parameters
25 = out / in print
28 = duration count start
CO Feature
40 = CO connection
41 = Dial mode
44 = Trunk Group assign
45 = ration lunch line
46 = ration line tonight
47 = ring during the
48 = ring tonight
Day 51 = CO Mode
Night Mode 52 = CO
49 = Delay ring day
50 = Delay ring night
57 = Auto designated CO Line Accs
Extension Feature
60 = Extension Group
Day 61 = COS
62 = COS Night
65 = Transfer to CO
66 = Forward to CO
67 = EBO
68 = DND Override
63 = Extension name
64 = Acc Code entry mode
99 = System Clear
33 = OHCA

Copyright © SHARING CENTER. All rights reserved.

Super SEO created by Blogger Tuts From Jom Kenal Islam